As long as it works properly, a freezer is an essential part of your life. Frost or ice building up inside the freezer can sometimes not only ruin your food but also significantly increase your energy bills. The worst-case scenario is that you make a mess and get water all over the place while trying to fix the problem.
So, how to defrost a freezer without getting water everywhere? There are numerous methods for defrosting a freezer without getting water everywhere. In this article, I’ll go over the details of the simplest and most useful ones. I would recommend reading the entire article to learn as much as possible. It is always a good idea to have a fallback option.
Steps for defrosting a freezer without getting water all over the place
Before learning how to defrost your freezer, it’s a good idea to understand why frost forms in the first place. Throughout the day, you open your freezer numerous times. As a result, outside air enters the freezer, and heat and moisture accumulate inside. This moisture eventually turns into frost.
Step 1: Before defrosting preparations
Before you begin this task, you must consider a number of factors. Trying not to make a mess while doing it by hand will necessitate extra focus and effort. As a result, you must take care of the following items.
Take everything out of your freezer and put it somewhere else. You must also make certain that the frozen food does not become warm or spoil. You can keep them in coolers with extra ice packs, or ask a neighbor if you can keep everything in their freezer for a while.
Consider where the water might flow once the ice melts. Maintain a supply of extra towels, old newspapers, and paper towels. Place newspaper or towels on the floor beneath the freezer to absorb the water. Put some towels on the freezer shelves for the same purpose.
Place the end of the drainage host over a bucket if your freezer has one. So, the water falls into the bucket and does not escape.
Remove the drawers, shelves, and any other removable components to facilitate defrosting.
*** Read more: Can Mold Grow In The Freezer? Way To Clean Moldy Freezer
Step 2: Defrosting
I’ve compiled a list of some of the most practical and doable defrosting methods. Please keep in mind that the precautions I mentioned above should be implemented in addition, as they will help with water absorption.
Allow the ice to melt
The simple solution is to unplug it, open the door, and wait for the ice to melt.
This is the simplest method, but it also takes the longest, especially if you live in a colder climate. It’s also the most secure way to defrost your freezer. Simply open the door, walk away, and bring some patience with you. As the ice melts, you may want to use a sponge or a towel to mop up the excess water. You could also put old towels on the floor to absorb any water that leaks from the appliance.
Perhaps you, like me, are impatient. If that’s the case, here are a few tips for speeding up the defrosting process.
Making use of a blow dryer
Set your blow dryer to the warmest setting and hold it 6 inches away from the ice. Continue to move the dryer across different areas of ice so that the heat is distributed evenly. Additionally, keep the dryer’s cord away from the water and ice.
Allowing the dryer to get too close to the ice or the sides of your freezer can cause damage to such units. This includes the plastic structure of your freezer as well.
Warm water is being poured
Pour warm water on top of the ice. For greater precision, measuring cups can be used. This is a very quick process. Instead of pouring, use a warm piece of clothing to wipe over the ice.
Place as many towels and newspapers as possible on the bottom of the freezer and the floor for this method. As soon as the towels and newspaper become soaked, replace them. Keep a laundry basket nearby to dispose of them.
Make use of a fan
A fan can assist in the circulation of warm air into your freezer. This method, however, works best when the air in your home is warm enough to make a noticeable difference. This is especially useful for anyone who has a large freezer in their garage.
Simply place a fan outside the freezer with the door propped open. The airflow speeds up the melting of the ice. Depending on the thickness of the ice, this will still take some time to work. However, you can accelerate the process without putting in much effort.
Arranging warm containers on shelves
A tried-and-true method is to fill bowls or pans with boiling water and place them at the bottom of the freezer or on the shelves if you can’t remove them. Then, close the door.
The steam from the bowls or pans can warm the ice inside the freezers because they are properly sealed. The hotter underside of the bowl may also melt the ice at the bottom. As soon as the containers begin to lose their warmth, change them every 10 minutes.
Make use of rubbing alcohol and a hot cloth
To loosen the ice, dip a rag in boiling water, then in rubbing alcohol, and place it on it. Concentrate on small pieces at the edges, grasping loose areas and wiping the ice away. The frost should begin to melt fairly quickly. This method is best for removing a thin layer of frost rather than large chunks of ice.
Using a vacuum cleaner
Start blowing with a very small nozzle on your vacuum. Begin with the highest points and work your way down. When the ice begins to melt, adjust the vacuum so that it sucks up the water. Take care not to electrocute yourself.
Scraping the ice is probably the most common way to speed up the defrosting process. If you go this route, make certain that you do so safely.
To avoid injuring yourself or puncturing the wall of your freezer or a gas line, use a traditional ice scraper, a plastic spatula, or a wooden spoon. We recommend combining this defrosting method with the others on this list.
Making use of a heated spatula
Remember to use oven mitts during this process. It’s a particularly perilous one. Holding a metal spatula over a flame will cause it to become heated. Warm the area by pressing the spatula against the ice. Begin scraping and chipping away at the ice slowly and gently. Make a bucket underneath for the ice to fall into.
This method should only be used as a last resort because it is not only dangerous for you, but it can also scrape away at the insides of your freezer and ruin the units.
Step 3: Get to work cleaning
After you’ve successfully removed the ice buildup, begin cleaning the freezer. 1 tablespoon baking soda in 1 cup soapy water Rinse the insides of your freezer with a sponge or a thick cloth dipped in water.
After that, rub everything inside with a dry cloth or towel to ensure that nothing is left wet. After 30 minutes, bring the food inside.
Take note: defrosting frequency
Defrosting your freezer once a year is ideal. However, if your freezer is rapidly accumulating ice, you should repeat the process. If your ice is more than 14 inches thick, it is also a sign that your freezer needs to be defrosted.
*** Read more: Do Frozen Waffles Go Bad? Ways To Properly Store Waffles
What is the most convenient way to defrost a freezer?
Allowing the ice to melt on its own is the simplest way to defrost a freezer. Remember to remove all food from the freezer and place it in proper containers.
This method may not sound convincing, but it works. To begin, unplug your freezer and leave the doors open. You will notice that the ice begins to melt on its own. Although the method is the simplest, it is also the most time-consuming.
You can also use a fan outside the freezer to speed up the defrosting process. The ice will melt faster as the fan circulates air into the freezer at a faster rate. Make sure you have towels and dry clothes on hand.
When is it possible for a self-defrosting freezer to leak during defrosting?
You do not have to defrost your freezer yourself if it has a self-defrosting feature. Your freezer will take care of it. Unfortunately, those can sometimes start leaking. A clogged drain hose is the most common cause of this.
Debris or food particles can clog your freezer’s drain hose at times. With no outlet, ice forms and eventually begins to leak water. Unplug your freezer and use warm water to clear the hose. Make use of a small funnel. Pipe cleaners are another option.
- Do you leave the freezer door open when defrosting it?
Allowing the ice to melt on its own is the simplest way to defrost a freezer. After unplugging your appliance, leave the door open and allow the ice to melt naturally. Put a fan near your freezer to help it defrost if you want to speed up the melting process.
- When defrosting a freezer, what should you avoid?
DO NOT pierce the ice with an ice pick, knife, or another sharp object. You risk damaging the unit by puncturing the walls. Instead of a knife, use a plastic spatula to scrape away some material.
- When defrosting a fridge, where do you put the towels?
As the fridge defrosts, place a towel on the ground to absorb any excess water. To avoid damaging the floor, make sure the towel covers the bottom of the fridge as well as the floor around it.
- When defrosting a freezer, where do you put the food?
Remove the contents of the fridge or freezer, wrapping frozen food in thick layers of newspaper and storing it close together or in a cool bag or a neighbor’s freezer.
- How long should you leave food in the freezer after it has been defrosted?
Food should be at a temperature between -0 and -14 degrees Celsius before being returned to the freezer. That is when the temperature is stable enough to effectively freeze food. This could take anywhere from a few hours to 15 hours.
*** Read more: Can You Freeze Cooked Hamburgers? The Best Way To Do It!
In a nutshell, this post demonstrated how to defrost a freezer without getting water everywhere.
Your freezer is necessary and probably one of the most useful appliances. It preserves food and can safely store items for later use. Frost on the inside walls of your freezer reduces efficiency and raises your energy bill.
Many newer freezer models include self-defrosting capabilities. But if you weren’t fortunate enough to have this feature, don’t worry because you’ve read this article.